-70%
Crest Audio CA6 Power Amplifier For Discount
Original price was: $600.00.$180.00Current price is: $180.00.
22 people are viewing this right now

Guaranteed safe & secure checkout
Description
Additional Information
Questions
Description
 Pre-owned. In full working condition. Minor blemishes
Â
CA 6 1500W Power Amplifier Specifications:
- Model: CA6
-
- 8 Ohms Stereo Power: 400W 1kHz, 0.03% THD+N; 350W 20Hz-20kHz, 0.1% THD+N
-
- 4 Ohms Stereo Power: 600W 1kHz, 0.03% THD+N; 500W 20Hz-20kHz, 0.1% THD+N
-
- 2 Ohms Stereo Power: 750W 1kHz, 0.03% THD+N; 600W 20Hz-20kHz, 0.1% THD+N
-
- 8 Ohms Bridged Mono Power: 1200W 1kHz, 0.03% THD+N; 1000 W 20Hz-20kHz, 0.1% THD+N
-
- 8 Ohms Bridged Mono Power: 1500W 1kHz, 0.03% THD+N; 1200W W 20Hz-20kHz, 0.1% THD+N
-
- Max RMS Output Voltage (each channel): 73V
-
- Peak Output Voltage (each channel): 103V
-
- Frequency Response (+0 -0.3dB, 1W 81 2):
-
- 20Hz-20kHz, -3dB@135kHz
-
- Power Bandwidth (rated power at 4 Ohms, 1% THD+N): 20Hz-20kHz, -1.1dB +0dB
-
- TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on off transient, current inrush, sub ultrasonic input.
-
- THD+N (rated power at 4 Ohm, 1kHz): <0.01%
SMPTE IMD (rated power at 81 2, 60Hz & 7kHz): <0.01%
Damping Factor (10-400Hz at 8 Ohms): 400:1
-
- Input CMRR (1kHz): > – 60dB
-
- Input Sensitivity (rated power at 8 Ohms ): 0.775V standard (switchable)
-
- Voltage Gain: X68 standard (switchable)
-
- Input Impedance (balanced unbalanced): >20kohms >10kohms
-
- Hum and Noise ( A weighted, full power, 4 Ohms): -105dB
-
- Crosstalk ( A weighted, full power, 4 Ohms ): > – 60dB
-
- Class: H
-
- Input Connectors (per Channel): Female XLR (pin 2+, switchable for pin 3+), TRS (tip+)
-
- Input Connectors (per Channel): Speakon connectors or 5-way output binding posts (market dependant)
-
- Filter Storage: 68,000 mF
-
- Power Supply (factory configured): 100V-240V, 50-60Hz
-
- Idle Current Draw 120V: 1.6A
-
- 1 8 Power Current Draw (typical music, 120V 4 Ohms) 6.0A
-
- 1 3 Power Current Draw (continuous music, 120V 4 Ohms): 13.0A
-
- Max Current Draw (circuit breaker rating, 120V 4 Ohms): 18.0A
-
- Thermal Emissions (1 8 Power, 4 Ohms): 2630 BTU hr
-
- Thermal Emissions (1 3 Power, 4 Ohms): 3713 BTU hr
-
- Cooling: Back-to-front via 2 rear panel mounted variable-speed DC fans
-
- (filters removable without tools)
-
- Controls: Front Panel: 2 attenuators; Rear Panel Switches: signal ground lift,
-
- mode select switch
-
- LED indicators (per channel) Clip Limit, Signal, Temp DC, Active
-
- Construction: Steel chassis, 16 gauge. Double thickness in rack ear areas.
-
- Dimensions (W x H x D): 19 x 3.5 x 18 , (483 x 89 x 458 mm)
-
- Weight: 44 lbs. (20 kg)
-
Â
Â
- Model: CA6
- 8 Ohms Stereo Power: 400W 1kHz, 0.03% THD+N; 350W 20Hz-20kHz, 0.1% THD+N
- 4 Ohms Stereo Power: 600W 1kHz, 0.03% THD+N; 500W 20Hz-20kHz, 0.1% THD+N
- 2 Ohms Stereo Power: 750W 1kHz, 0.03% THD+N; 600W 20Hz-20kHz, 0.1% THD+N
- 8 Ohms Bridged Mono Power: 1200W 1kHz, 0.03% THD+N; 1000 W 20Hz-20kHz, 0.1% THD+N
- 8 Ohms Bridged Mono Power: 1500W 1kHz, 0.03% THD+N; 1200W W 20Hz-20kHz, 0.1% THD+N
- Max RMS Output Voltage (each channel): 73V
- Peak Output Voltage (each channel): 103V
- Frequency Response (+0 -0.3dB, 1W 81 2):
- 20Hz-20kHz, -3dB@135kHz
- Power Bandwidth (rated power at 4 Ohms, 1% THD+N): 20Hz-20kHz, -1.1dB +0dB
- TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on off transient, current inrush, sub ultrasonic input.
- THD+N (rated power at 4 Ohm, 1kHz): <0.01%
SMPTE IMD (rated power at 81 2, 60Hz & 7kHz): <0.01%
Damping Factor (10-400Hz at 8 Ohms): 400:1 - Input CMRR (1kHz): > – 60dB
- Input Sensitivity (rated power at 8 Ohms ): 0.775V standard (switchable)
- Voltage Gain: X68 standard (switchable)
- Input Impedance (balanced unbalanced): >20kohms >10kohms
- Hum and Noise ( A weighted, full power, 4 Ohms): -105dB
- Crosstalk ( A weighted, full power, 4 Ohms ): > – 60dB
- Class: H
- Input Connectors (per Channel): Female XLR (pin 2+, switchable for pin 3+), TRS (tip+)
- Input Connectors (per Channel): Speakon connectors or 5-way output binding posts (market dependant)
- Filter Storage: 68,000 mF
- Power Supply (factory configured): 100V-240V, 50-60Hz
- Idle Current Draw 120V: 1.6A
- 1 8 Power Current Draw (typical music, 120V 4 Ohms) 6.0A
- 1 3 Power Current Draw (continuous music, 120V 4 Ohms): 13.0A
- Max Current Draw (circuit breaker rating, 120V 4 Ohms): 18.0A
- Thermal Emissions (1 8 Power, 4 Ohms): 2630 BTU hr
- Thermal Emissions (1 3 Power, 4 Ohms): 3713 BTU hr
- Cooling: Back-to-front via 2 rear panel mounted variable-speed DC fans
- (filters removable without tools)
- Controls: Front Panel: 2 attenuators; Rear Panel Switches: signal ground lift,
- mode select switch
- LED indicators (per channel) Clip Limit, Signal, Temp DC, Active
- Construction: Steel chassis, 16 gauge. Double thickness in rack ear areas.
- Dimensions (W x H x D): 19 x 3.5 x 18 , (483 x 89 x 458 mm)
- Weight: 44 lbs. (20 kg)
-
Â
Â
Additional Information
Title | Default Title |
---|